Benefits of stainless steel protective film. The benefits of NB Technology stainless steel protective film include: 1. Super strong tear resistance and puncture resistance. 2. NB protective film is very easy to peel off with bare hands. 3. NB protective film is durable and has good flexibility. 4. Allow the lens to sit in the solution for 15 seconds. Remove the lens from the anti-reflective solution, and set aside. Submerge the second lens in the anti-reflective stripping solution, plus side down (convex side down). Remove the lens after 15 seconds, and set aside. Rinse each lens in tap water, and dry thoroughly with a cotton cloth. Hold the heat source a few inches from the film and move it back and forth. The heat will help to soften the adhesive under the film, making it easier to remove. 2. Peel off the film: Once the adhesive has softened, use a plastic scraper or credit card to gently lift one corner of the plastic film. Gradually peel the film away from the window These pre-applied protective films are quite common on other devices with glass displays – like smartphones and tablets – and Nintendo points out that if you still want to use your own if you leave the plastic on for an extended period of time, it can be bad. my buddy got a used Yamaha acoustic from someone he worked with who had the guitar for several years, but never took the plastic off of the pick guard. the edges of the plastic were peeling up, so he decided to remove the plasticsome parts were bonded to the pick It is dependent on the kind of movie that it is. If it is a water-adhered film, gently use a plastic scraper with warm soapy water to remove it, and then clean the area with a mild solvant cleaner. If it is a glued film, warm it gently with a hair dryer and scrape it off with a plastic scaper. Once the film has been removed, use glass cleaner JJwmb. This wasn't as satisfying as I imagined it would be. :'( 👍 = You like this video👎 = You don't like this video Step-by-Step Guide to Removing Old Protective Film. 1. Gather the necessary supplies: You’ll need a few basic items to effectively remove the old protective film from plastic. These include a hairdryer or heat gun, a plastic scraper or credit card, a mild cleaning solution, a microfiber cloth, and rubbing alcohol. 2. Lay down plastic sheets to catch debris and film remnants. 3. Softening the Adhesive. Use a heat gun or hairdryer to soften the adhesive. Gently heat the film, starting at one corner and working across. 4. Peeling Off the Film. Once the adhesive is soft, carefully peel off the film from one corner. Additionally, use eye protection. Not just safety goggles, but ‘sealed’ eye protection as these nasty chemicals are absorbed through your eyes. A full-face mask is another option instead of a separate mask and goggles. But, having said all of that, the heat stretchable UV protective film seems like the winner to me. Apply moderate pressure and work in a circular motion. You'll need to polish both sides of each lens, so focus on one side at a time, buffing the lens until the coating becomes patchy and flakes even more. Continue buffing until each side of each lens feels completely smooth. Rinse the lenses with plain water and re-apply the sunscreen to the Question connected AIO cooler to cpu with the plastic still on. Thermal paste has glued the cpu to the cooling plate. Thermal paste has glued the cpu to the cooling plate. How much of my pc did I break?

how to remove old protective film from plastic